Please confirm your age to continue. I hereby confirm that I am at least 18 years old.
The SQuape E[c]

The SQuape E[c] is a cut-down and more affordable version of the SQuape E[motion]. While the bases of the E[c] and E[motion] are identical, the entire stainless steel tank section was replaced with a simple PMMA tank. With this change, the TopFill system is no longer needed and it is very reminiscent of the popular SQuape R[eloaded] and R[s].

Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomiser-chamber (consisting of ematalised and anodised aluminum). The SQuape E[c] is a rebuildabl

The SQuape E[c] is a cut-down and more affordable version of the SQuape E[motion]. While the bases of the E[c] and E[motion] are identical, the entire stainless steel tank section was replaced with a simple PMMA tank. With this change, the TopFill system is no longer needed and it is very reminiscent of the popular SQuape R[eloaded] and R[s].

Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomiser-chamber (consisting of ematalised and anodised aluminum). The SQuape E[c] is a rebuildabl

The SQuape E[c] is a cut-down and more affordable version of the SQuape E[motion]. While the bases of the E[c] and E[motion] are identical, the entire stainless steel tank section was replaced with a simple PMMA tank. With this change, the TopFill system is no longer needed and it is very reminiscent of the popular SQuape R[eloaded] and R[s].

Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomiser-chamber (consisting of ematalised and anodised aluminum). The SQuape E[c] is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland by StattQualm.

The SQuape E[c] is a further development of the SQuape R[eloaded] and R[s]. The atomiser is ideal for both beginners and experienced vapers. Three different decks are available for the SQuape E[c]: Deck We (included), Deck Be and Deck De and is fully compatible with the SQuape E[motion]. In contrast to the SQuape R, the SQuape E[c] has improved poles for mounting the wire as well as a considerably softer airflow. It is ideal for both OpenDraw and, with the addition of the MTL kit, for mouth-to-lung vapers.

The SQuape E[c] is the inexpensive and perfect complement to the SQuape E series. "The Most Affordable SQuape Ever"

The SQuape E[c] is a cut-down and more affordable version of the SQuape E[motion]. While the bases of the E[c] and E[motion] are identical, the entire stainless steel tank section was replaced with a simple PMMA tank. With this change, the TopFill system is no longer needed and it is very reminiscent of the popular SQuape R[eloaded] and R[s].

Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomiser-chamber (consisting of ematalised and anodised aluminum). The SQuape E[c] is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland by StattQualm.

The SQuape E[c] is a further development of the SQuape R[eloaded] and R[s]. The atomiser is ideal for both beginners and experienced vapers. Three different decks are available for the SQuape E[c]: Deck We (included), Deck Be and Deck De and is fully compatible with the SQuape E[motion]. In contrast to the SQuape R, the SQuape E[c] has improved poles for mounting the wire as well as a considerably softer airflow. It is ideal for both OpenDraw and, with the addition of the MTL kit, for mouth-to-lung vapers.

The SQuape E[c] is the inexpensive and perfect complement to the SQuape E series. "The Most Affordable SQuape Ever"

46mm (5ml) & 36mm (2ml)
Height
22 mm
Diameter
SingleCoil or DualCoil
Coiling
DL or MTL
Airflow
Features
  • A very lean and elegant design
  • Stepless airflow control
  • Single- or dual coil usage with interchangeable decks.
  • Adjustable 510 connector (gold plated)
  • Deck is accessible even with full tank
  • Nonconductive components inside the evaporation-chamber (deck and chimney) - no danger of short circuits
  • 100% Made in Switzerland
  • Very easy handling and coiling options
  • Suitable for Temp. Control and V/W mode
  • Easy filling

Available in different colors as a full set (5ml and 2ml): Black (standard), red, blue, green, purple and orange.


Note 1: It is necessary to install the enclosed deck before use (see drawing in the manual)
Note 2: The tank is made of PMMA, which has been thermally deburred and is therefore very strong. Nevertheless, it should be noted that aggressive liquids - so-called tank killers - can attack the PMMA.


Three different decks available: Deck We, Deck Be, Deck De (all details at the SQuape Shop)

  • Diameter: 22 mm
  • Height (without SQuip Tip and 510 connector): 46mm (5ml version) / 36mm (2ml version)
  • Weight: 38g (5ml version) / 36g (2ml version)
  • Thread: 510
  • Capacity: ~5ml and ~2ml

  • Stainless steel components: stainless steel number 1.4404 / 316L
  • Tank section: PMMA (thermally deburred)
  • Deck and chimney: Aluminum ematalised, anodised
  • Centerpin: Ecobrass gold plated
  • Mouthpiece: Delrin black
  • O-rings: nbr 70 shore

FAQ
  • I got dry hits.
  • Open the liquid control anti clockwise. Do you have enough liquid in your tank? You might have too much cotton placed in your deck. The cotton shall be placed very fluffy into the liquid channels and pockets (Deck Be).

  • I got some leakage – liquid is draining out of the afc holes.
  • A leakage is often due to the wrong placement of the cotton:

    - Deck We: Place cotton, mesh or silica deeper into the liquid channel. Place the cotton fluffy into the horizontal liquid channels. You should feel a slightly resistance while you pulling the cotton trough your coil.

    - Deck Be: Put more cotton into the pockets. The liquid hole must be covered with cotton (inside the deck).

    - Deck De: the cotton must be cut flush at the end of the channels and sit fully into the channels.

    If your SQuape E[motion] leaks right after filling, that means you haven’t closed the liquid control completely. You need to turn the locking cap 2/3 clockwise. Make sure you are on „closed“ mode. Only fill the SQuape E[motion] in „closed“ mode!

  • „No atomizer found“
  • Slightly unscrew the centerpin. If this won’t work, please get in contact with support@squape.ch.

  • How many times do I have to clean the SQuape E?
  • You might have to clean the centerpin from time to time. Just wipe it off with a paper towel. We recommend to clean the atomizer with water or ultrasonic cleaner. Never use a dishwasher!

  • I can not remove the deck.
  • You got different possibilities:

    - Remind, the deck can always be removed. Please pull the deck straight – otherwise it can be tilled!

    - Put the base into a freezer for about 30 min. - Rubberband (supplied SQ Grip Band), paper towel or something similar, which helps to protect the deck.

    - Pull with pliers (be careful and protect the deck and the pliers) – pull straight.

    - Do not touch the unprotected deck with pliers.

    - you can use a rubber grip of a pair of pliers

  • I can turn the afc ring too easy or too hard
  • Replace the o-ring with an o-ring from the replacement set. (o-rings have tolerances and these change noticeably the resistance). At all events, moisten the o-ring with some liquid.

  • Where do I get a SQuape E[motion]?
  • The shop list can be found on our partner page or directly on shop.squape.ch/en

  • Where can I get more information and tips?
  • Check our Facebook group: https://www.facebook.com/groups/squape.stattqualm.official

  • Where can I find reviews and tutorials of the SQuape E[motion]?
  • https://www.youtube.com